Datasheet

1: LED yellow

2: LED green

Product characteristics

Inductive sensor

Rectangular, plastics

Connector

5 positions of the sensing face selectable

Sensing range 35 mm; [nf] non-flush mountable

Electrical data

DC PNPElectrical design

10...36 DC; "supply class 2" to cULus.Operating voltage [V]

< 20Current consumption [mA]

IIProtection class

yesReverse polarity protection

Outputs

complementaryOutput function

< 2.5Voltage drop [V]

< 0.1Leakage current [mA]

200Current rating [mA]

pulsedShort-circuit protection

yesOverload protection

80Switching frequency [Hz]

Range

35Sensing range [mm]

35 ± 10 %Real sensing range (Sr) [mm]

0...28.3Operating distance [mm]

Accuracy / deviations

mild steel = 1 / stainless steel approx. 0.7 / brass approx. 0.4 / Al approx. 0.4 / Cu

approx. 0.3

Correction factors

1...20Hysteresis [% of Sr]

-10...10Switch-point drift [% of Sr]

IM5134

Inductive sensorsIMC4035-CPKG/US-100-DPA

PAGE 1
IM5134 IMC4035-CPKG/US-100-DPA Inductive sensors 1: LED yellow 2: LED green Product characteristics Inductive sensor Rectangular, plastics Connector 5 positions of the sensing face selectable Sensing range 35 mm; [nf] non-flush mountable Electrical data Electrical design Operating voltage Current consumption DC PNP [V] [mA] Protection class 10...36 DC; "supply class 2" to cULus. < 20 II Reverse polarity protection yes Outputs Output function Voltage drop complementary [V] < 2.
PAGE 2
IM5134 IMC4035-CPKG/US-100-DPA Inductive sensors Environment Ambient temperature [°C] -25...70 Protection IP 67 Tests / approvals EMC MTTF EN 61000-4-2 ESD: EN 61000-4-3 HF radiated: EN 61000-4-4 Burst: EN 61000-4-5 Surge: EN 61000-4-6 HF conducted: EN 55011: [Years] 8 kV CD / 6 kV AD 10 V/m 2 kV 0.5 kV (line to line, Ri: 2Ohm) 10 V class B 1208 Mechanical data Mounting non-flush mountable Housing materials housing: PA (polyamide); connector: stainless steel Weight [kg] 0.