Operating instructions Bluetooth Mesh base station 80298783 / 00 08 / 2021 EIO404 EN
EIO404 Bluetooth Mesh base station Contents 1 Preliminary note...................................................................................................................................... 3 1.1 Symbols used ............................................................................................................................... 3 1.2 Warnings used ............................................................................................................................. 3 1.
Bluetooth Mesh base station 1 EIO404 Preliminary note You will find instructions, technical data, approvals and further information using the QR code on the unit / packaging or at www.ifm.com. 1.1 Symbols used EN Instruction requirement Reaction, result [...] Designation of keys, buttons or indications Cross-reference Important note Non-compliance may result in malfunction or interference Information Supplementary note 1.
EIO404 2 Bluetooth Mesh base station Safety instructions ► The unit described is a subcomponent for integration into a system. – The system architect is responsible for the safety of the system. – The system architect undertakes to perform a risk assessment and to create documentation in accordance with legal and normative requirements to be provided to the operator and user of the system.
Bluetooth Mesh base station 3 EIO404 Intended use The base station EIO404 communicates via Bluetooth Mesh with e.g. the Bluetooth Mesh Adapter EIO344. The base station can be configured via Bluetooth and an APP. All available functions can be accessed via moneo|blue. The APP is available for Android and IOS in the App Store. EN Likewise, configuration is also possible via the Ethernet interface. The Bluetooth Mesh adapters can be integrated via the two configuration options.
EIO404 3.1 Bluetooth Mesh base station Example of technical set-up 3 2 4 1 7 5 6 Fig. 1: Application example 1: Power supply 2: Laptop with moneo or Gateway 3: EIO404 base station 4: Mobile device with moneo|blue via Bluetooth LE 5: Example sensor 6: BT Mesh adapter (e.g.
Bluetooth Mesh base station 4 EIO404 Connection possibilities The EIO344 has several connection possibilities, which also include various functions. 4.1 Ethernet interface with IoT core The device has an Ethernet interface. M12 socket ► ► ► ► Ethernet communication (data acquisition) Parameter setting of BT-Mesh network Parameter setting of Ethernet interface Setting of further parameters Ethernet is a globally standardised technology (ISO/IEC 11801) for communication. 4.
EIO404 5 Bluetooth Mesh base station Scale drawing The max. tightening torque of the screws when mounting the unit is 0.8 Nm. 6 6.1 Installation General installation instructions When mounting several systems adhere to the minimum distances. The max. tightening torque of the screws when mounting the unit is 0.8 Nm. Use M4 screws. The maximum insertion depth is 15 mm. Information on the available mounting accessories is available on our website at www.ifm.com 6.
Bluetooth Mesh base station 6.3 EIO404 Mounting options For installation, the following optional accessories are available. The device can be mounted without the accessories. For installation, please use the threaded sleeves on the back of the unit. The required screws are not supplied with the device. 6.3.1 ► 6.3.2 Installation with angle bracket E80335 The angle bracket is for lateral mounting of the unit.
EIO404 ► Fix the unit with fixing screws to the designated location.
Bluetooth Mesh base station 7 EIO404 Electrical connection The unit must be connected by a qualified electrician. Observe the national and international regulations for the installation of electrical equipment. Voltage supply according to EN 50178, SELV, PELV. EN CAUTION Input current is not limited. No fire protection. Protect circuits. ► Disconnect power. ► Connect the unit as follows: 1: 5-pole M12 connector • Power supply 2: 5-pole M12 female connector • Ethernet connection 2 1 Fig.
EIO404 7.1 Bluetooth Mesh base station Mounting the connector To achieve the protection rating indicated in the data sheet, the following has to be observed: ► Use IO-Link cable with IP class. ► Connect the connector with the unit. The arrow indicates the position of the coding. ► Tighten the coupling nut. ► Minimum tightening torque: 0.6 Nm (tightening by hand) ► Maximum tightening torque: 1.5 Nm (using a torque wrench). 7.2 ► 7.
Bluetooth Mesh base station 8 EIO404 Indicators, output response and troubleshooting The indicator shows the current status of the unit via RGB LED. 8.1 RGB indicators Colour Designation red Fault indication green Operation indication blue Bluetooth EN Fig. 4: RGB indicator 8.2 RGB status indication, output response and troubleshooting The unit provides self-diagnostic options. Errors are indicated by the red LED.
EIO404 9 Bluetooth Mesh base station Parameter setting The parameters of this unit can be set via 2 interfaces. It is possible to read information or make changes via Ethernet or Bluetooth. Assigned information and changes are possible for each interface. For Ethernet, connect the M12 connector to a hardware for parameter setting. The connection is established via Bluetooth with an app. Information about suitable parameter setting software at www.ifm.com. 9.
Bluetooth Mesh base station EIO404 10 Set-up of the moneo configure application 10.1 moneo configure function EN With moneo configure, the base station can be reached via the IoT interface. 10.2 System requirements moneo configure is installed on a Windows operating system. · Windows 7/10/11 · Ethernet interface For this purpose, ifm also offers a ready-to-use system, an appliance (QHA200) with Linux and moneo installed. 10.
EIO404 Bluetooth Mesh base station 11 Set-up of the moneo|blue application 11.1 moneo|blue’s functions With moneo|blue, the EIO404 transmits live data, which is displayed and allows the parameters to be set. Saved data can be read via a data file. Acyclic parameters and cyclic process data can be read from and written to. 11.2 System requirements To install moneo|blue on a mobile device such as smartphone or tablet an internet connection is recommended.
Bluetooth Mesh base station EIO404 12 Copyright and trademarks All trademarks and company names used are subject to the copyright of the respective companies. Apple® is a registered trademark of Apple Inc. EN Google® is a registered trademark of Google LLC. Bluetooth® is a registered trademark of Bluetooth SIG Inc. iOS® operating system is a registered trademark of Apple Inc. Android® operating system is a registered trademark of Google LLC.
EIO404 Bluetooth Mesh base station 13 Approvals and certificates The EU declaration of conformity, approvals and country-specific certificates are available at: www.ifm.
Bluetooth Mesh base station EIO404 14 Maintenance, repair and disposal The unit is maintenance-free. ► After use dispose of the unit in an environmentally friendly way in accordance with the applicable national regulations. Cleaning the unit: ► ► Disconnect the unit from the voltage supply. Clean the unit from dirt using a soft, chemically untreated and dry micro-fibre cloth.
# 0 ! 1 ! . & ! @ ! ?( & & ( & ( -- / ( & & ! ! / 7 & " ! "& " - ! . % ! ! ! . !' ! ! & # 0 / & ! - ! 5 & - 7 # # ! ' $/ " ( / ! " '$ 0!+& ! * 2 1 .
0 / & & - 6 . *662 1- ! ! & / / & - - & ! & / & ? ?" " ! 5! 5 - 7 ) ( ) 4/ 6. 7 IHJ J& - 1 - & & & - J -- & ! 1 @<* H / ( 6& & .
