Operating instructions Bluetooth Mesh adapter 80298783 / 00 08 / 2021 EIO344 EN
EIO344 Bluetooth Mesh adapter Contents 1 Preliminary note .............................................................................................................................. 3 1.1 Symbols used ....................................................................................................................... 3 1.2 Warnings used ..................................................................................................................... 3 1.3 Safety symbols on the unit ..............
Bluetooth Mesh adapter 1 EIO344 Preliminary note You will find instructions, technical data, approvals and further information using the QR code on the unit / packaging or at www.ifm.com. 1.1 Symbols used Requirement Instruction Reaction, result [...] Designation of keys, buttons or indications Cross-reference Important note Non-compliance may result in malfunction or interference Information Supplementary note 1.
EIO344 2 • Bluetooth Mesh adapter Safety instructions The unit described is a subcomponent for integration into a system. – The system architect is responsible for the safety of the system. – The system architect undertakes to perform a risk assessment and to create documentation in accordance with legal and normative requirements to be provided to the operator and user of the system.
Bluetooth Mesh adapter 3 EIO344 Intended use The EIO344 communicates via IO-Link with a sensor. Using Bluetooth and an APP, the connected sensor can be read and written. All available functions can be accessed via moneo|blue. The APP is available for Android and IOS in the App Store. DE The EIO344 also features a data storage function. This allows a defective sensor to be replaced quickly.
EIO344 4 Bluetooth Mesh adapter Connection possibilities The EIO344 offers several connection options which include, among others, various functions. 4.1 IO-Link connection and outputs This unit has two IO-Link communication interfaces. M12 connector: • • • Power supply Output pin 2 (looped through from sensor) and digital output pin 4 Pin 4 for parameter setting with an IO-Link software for the device side (reset, Ou1, events, history) M12 socket • Input for interaction with an IO-Link device.
Bluetooth Mesh adapter 5 EIO344 Electrical connection The unit must be connected by a qualified electrician. Observe the national and international regulations for the installation of electrical equipment. Voltage supply according to EN 50178, SELV, PELV. DE CAUTION Input current is not limited. No fire protection. Protect circuits. ► Disconnect power.
EIO344 5.1 Bluetooth Mesh adapter Mounting the connector To achieve the protection rating indicated in the data sheet, the following has to be observed: ► Use IO-Link cable with IP class. ► Connect the connector with the unit. The arrow indicates the position of the coding. ► Tighten the coupling nut. • Minimum tightening torque: 0.6 Nm (tightening by hand) • Maximum tightening torque: 1.5 Nm (using a torque wrench). 5.2 ► 5.
Bluetooth Mesh adapter 6 EIO344 Display elements, output response and troubleshooting The indicator shows the current status of the unit with an RGB LED. 6.1 RGB indicators DE Colour Designation Red Interference indication Green Operation indication Blue Bluetooth Fig. 4: RGB indicator 6.2 RGB status indicator, output response and troubleshooting The unit features self-diagnostic options. Faults are indicated by the red LED.
EIO344 7 Bluetooth Mesh adapter Parameter setting The parameters of this unit can be set via 2 interfaces. You can use IO-Link or Bluetooth to read information and make changes. Assigned information and changes are possible for each interface. For IO-Link, connect the M12 connector to a hardware for parameter setting. The connection is established via Bluetooth with an app. The parameter setting can be carried out with or without a sensor connected.
Bluetooth Mesh adapter 7.
EIO344 8 8.
Bluetooth Mesh adapter 8.2 EIO344 Bluetooth parameters and commands Parameter Function Name of the manufacturer Manufacturer name assigned a manufacturer ID Manufacturer text Additional information about the manufacturer Product name Full product name Product ID Manufacturer-specific product or type identification (e.g.
EIO344 Bluetooth Mesh adapter Application-specific identifier of the IOLink device Possibility to identify a device with user or application specific information PDin IO-Link device Process data input of the connected device Product name IO-Link device Product name of the connected device Serial number IO-Link device Serial number of the connected device PDout IO-Link device Process data output of the connected device IO-Link device status Device status of the connected device Event IO-Link de
Bluetooth Mesh adapter 9 9.1 EIO344 Set-up of the moneo configure application Function moneo configure DE With moneo configure, the adapter can be accessed via the IO-Link interface. This interface allows few functions. 9.2 System requirements moneo configure is installed on a Windows operating system. · Windows 7/10/11 · USB interface A ready-made system for this purpose is also offered by ifm. 9.
EIO344 Bluetooth Mesh adapter 10 Set-up of the moneo|blue application 10.1 moneo|blue’s functions With moneo|blue, the EIO344 transmits live data, which is displayed and allows the parameters to be set. Saved data can be read via a data file. Acyclic parameters and cyclic process data can be read and written. 10.2 System requirements To install moneo|blue on a mobile device such as smartphone or tablet an internet connection is recommended.
Bluetooth Mesh adapter EIO344 11 Copyright and trademarks All trademarks and company names used are subject to the copyright of the respective companies Apple® is a registered trademark of Apple Inc. DE Google® is a registered trademark of Google LLC. Bluetooth® is a registered trademark of Bluetooth SIG Inc. iOS® operating system is a registered trademark of Apple Inc. Android® operating system is a registered trademark of Google LLC.
EIO344 Bluetooth Mesh adapter 12 Approvals and certificates The EU declaration of conformity, approvals and country-specific certificates are available at: www.ifm.
Bluetooth Mesh adapter EIO344 13 Maintenance, repair and disposal The unit is maintenance-free. ► After use dispose of the device in an environmentally friendly way in accordance with the applicable national regulations. Cleaning the device: ► ► Disconnect the device from the voltage supply. Clean the device from dirt using a soft, chemically untreated and dry micro-fibre cloth.
# 0 ! 1 ! . & ! @ ! ?( & & ( & ( -- / ( & & ! ! / 7 & " ! "& " - ! . % ! ! ! . !' ! ! & # 0 / & ! - ! 5 & - 7 # # ! ' $/ " ( / ! " '$ 0!+& ! * 2 1 .
0 / & & - 6 . *662 1- ! ! & / / & - - & ! & / & ? ?" " ! 5! 5 - 7 ) ( ) 4/ 6. 7 IHJ J& - 1 - & & & - J -- & ! 1 @<* H / ( 6& & .
