Instructions

ManualsBrandsIFIXIT ManualsBattery ReplacementIFIXIT Nexus 4 Battery Replacement

Table Of Contents

Nexus 4 Battery Replacement

Replace the battery in a Nexus 4.

Written By: Kaitlyn Jones

Nexus 4 Battery Replacement

Draft: 2022-06-30Guide ID: 13039 -

This document was generated on 2022-06-30 04:02:35 PM (MST).

Summary of content (5 pages)

PAGE 1
Nexus 4 Battery Replacement Guide ID: 13039 - Draft: 2022-06-30 Nexus 4 Battery Replacement Replace the battery in a Nexus 4. Written By: Kaitlyn Jones This document was generated on 2022-06-30 04:02:35 PM (MST). © iFixit — CC BY-NC-SA www.iFixit.
PAGE 2
Nexus 4 Battery Replacement Guide ID: 13039 - Draft: 2022-06-30 INTRODUCTION Use this guide to replace the battery in the Nexus 4's battery or to disconnect the battery before accessing the internal components. This short repair will only take a few minutes. TOOLS: SIM Card Eject Tool (1) T5 Torx Screwdriver (1) iFixit Opening Tool (1) Phillips #00 Screwdriver (1) This document was generated on 2022-06-30 04:02:35 PM (MST). © iFixit — CC BY-NC-SA www.iFixit.
PAGE 3
Nexus 4 Battery Replacement Guide ID: 13039 - Draft: 2022-06-30 Step 1 — Back Cover  Power off the phone, by long-pressing the power button and touching Power off.  Remove the SIM tray using the SIM Card Eject Tool.  This step is required in order to remove the back case. Step 2  Remove the two screws from the bottom of the phone with a T5 Torx Screwdriver. This document was generated on 2022-06-30 04:02:35 PM (MST). © iFixit — CC BY-NC-SA www.iFixit.
PAGE 4
Nexus 4 Battery Replacement Guide ID: 13039 - Draft: 2022-06-30 Step 3  Gently open the back case by prying along the edge of the cover, starting at a corner of the phone and circling around the phone using a plastic opening tool.  The opening process may take a few minutes. The plastic will make a light snapping noise as the back cover separates from the rest of the phone. Step 4 — Battery  Remove the two 1.8 mm Phillips screws holding down the battery connector.
PAGE 5
Nexus 4 Battery Replacement Guide ID: 13039 - Draft: 2022-06-30 Step 5 — Battery removal  Remove the blue tape that secures the white antenna cable to the battery.  Using a spudger, carefully disconnect the white antenna cable.  Carefully pry the battery out with a Plastic Opening Tool, starting at the top left-hand corner and working down towards the bottom right-hand corner.  If necessary, you can also use a plastic card to separate the battery from the metal midframe.