User Manual

ManualsBrandsifi ManualsOtherifi iEMatch+

Table Of Contents

1: Ver1.0

1. Audio signal input (3.5mm male plug)

Connect to the output of the smartphone, digital audio

player or music source.

2. TRRS-Balanced® switch

Select single-ended (SE) or Balanced (BAL) operation.

Ver1.0

ifi-audio.com

Tip: There is no need to switch to SE to use a single-ended headphone with a

TRS (3-connection) plug. The conversion to single-ended is automatic. The

switch can be set to BAL or SE with no ill effect.

If using a balanced headphone with the TRRS connection, leave the switch on

BAL. If you discover a channel is missing, please switch to SE as your music

source only supports single-ended operation.

If using a headphone with microphone, please switch to SE. The microphone

will be disabled.

3. Cable

The minZ™ cable construction is a custom helix design,

minimised both in capacitance and inductance. The minZ™

helix construction also provides intrinsic shielding and

protects the cable from RFI and EMI noise. This ensures the

cleanest possible transfer medium.

4. iEMatch+® for headphones/In-Ear-Monitors

Adjust the desired volume 'on-the-go' to ensure a safe,

comfortable listening level whilst, at the same time, enjoying

lower background noise and maximum dynamics.

There are two sensitivity settings:

I. High: For high-sensitivity headphones.

ii. Ultra: For ultra-sensitivity headphones.

Tip: Feel free to try both and see which listening level works best with your

headphones and your listening preferences.

For the technically-inclined, High-sensitivity and Ultra-sensitivity reduce gain

by -12dB and -24dB respectively.

Please note that with the iEMatch+® in-line, you are able to turn up the volume

on the music source far more. In extreme cases, this may cause the internal

amplifier of the music source to enter into 'clipping mode' and produce

unwanted audio distortion. This is no cause for alarm. If this occurs, please

reduce the volume or the sensitivity level of the iEMatch+® accordingly.

Specifications

• Ultra (-24dB) & High-Gain (-12db) sensitivity adjustment

• TRRS-Balanced® for Single-Ended and Balanced operation

• Custom minZ™ helix construction design, intrinsic

shielding provided by minZ™ helix

• 6N silver/copper matrix wiring with FINAL6063-T5

aluminium-magnesium alloy shell

• Gold-plated printed circuit board with audiophile

components (eg MELF resistors)

• Gold-plated 3.5mm male/female connectors

• Input Impedance: > 16 Ohm

• Output Impedance: < 2.5 Ohms (High-Sensitivity)

< 1 Ohms (Ultra-Sensitivity)

• Weight: 12.8 g (0.45 oz)

• Total Length : 116 mm (4.6")

• Warranty period: 12 months

Specifications are subject to change without notice.

iEMatch+

Travel accessories included

• Gold plated airplane adapter

• Soft foam contoured ear plugs (-37dB)

• Fabric travel pouch

Sens itivi ty

High

Ultra

BAL

5. Audio signal output (3.5mm female socket)

Headphone output.

Summary of content (1 pages)

PAGE 1
Tip: There is no need to switch to SE to use a single-ended headphone with a TRS (3-connection) plug. The conversion to single-ended is automatic. The switch can be set to BAL or SE with no ill effect. If using a balanced headphone with the TRRS connection, leave the switch on BAL. If you discover a channel is missing, please switch to SE as your music source only supports single-ended operation. If using a headphone with microphone, please switch to SE. The microphone will be disabled. iEMatch+ 1 3.