Users Manual

4
1. TFT Display
The TFT display shows current playback mode, format, sample rate, and the IP address of the
NEO Stream when available.
Tip: TFT screen should be on the left-hand side when NEO Stream is positioned horizontally, and at the top when positioned vertically.
2. Multi-function Knob
Turn for volume control, if enabled.
Turn to select the function to adjust after short-pressing button 4.
- Volume control and Mute (turn the knob/Short press)
- Screen brightness is also selected with a long press of the knob.
- SYSTEM STATUS - displays IP addresses and system version
- Advanced/Simple TFT display
- Audio Output Port Selection – Analogue, Digital, or USB
- System Mode Selector - AIO, DLNA, Tidal Connect, ROON, or NAA
- Hotspot ON/OFF
- Digital Filters
Tip: Turn to select the function to adjust after short-pressing button 4. Short press once to enter the selection, turn knob to make changes,
short press again to conrm change.
I) Volume control and Mute
Turn the knob to change the volume. Short press to mute/unmute the sound.
Tip: To enable or disable the volume control, adjust the Playback Options in Settings on http://i.local/