Safety Information

www.tuv.com
Page 28 of 61
Report No.: 50250100 001
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1F
6.1.2.2
Exclusions ....................................................:
N/A
6.2
Protection of equipment users from overvoltages on telecommunication
networks
N/A
6.2.1
Separation requirements
N/A
6.2.2
Electric strength test procedure
N/A
6.2.2.1
Impulse test
(see appended table 5.2)
N/A
6.2.2.2
Steady-state test
(see appended table 5.2)
N/A
6.2.2.3
Compliance criteria
N/A
6.3
Protection of the telecommunication wiring system from overheating
N/A
Max. Output current (A) ..................................:
¾
Current limiting method ...................................:
¾
7
CONNECTION TO CABLE DISTRIBUTION SYSTEMS
N/A
7.1
General
N/A
7.2
Protection of cable distribution system service
persons, and users of other equipment connected
to the system, from hazardous voltages in the
equipment
N/A
7.3
Protection of equipment users from overvoltages
on the cable distribution system
N/A
7.4
Insulation between primary circuits and cable
distribution systems
N/A
7.4.1
General
N/A
7.4.2
Voltage surge test
(see appended table 5.2)
N/A
7.4.3
Impulse test
(see appended table 5.2)
N/A
A
ANNEX A, TESTS FOR RESISTANCE TO HEAT AND FIRE
UL Recognized material used
P
A.1
Flammability test for fire enclosures of movable
equipment having a total mass exceeding 18
kg,
and of stationary equipment (see 4.7.3.2)
N/A
A.1.1
Samples ....................................................... :
¾
Wall thickness (mm)........................................ :
¾
A.1.2
Conditioning of samples; temperature (
°
C) ........ :
N/A
A.1.3
Mounting of samples ...................................... :
N/A
A.1.4
Test flame (see IEC 60695-11-3)
N/A
Flame A, B, C or D ......................................... :
¾