Safety Information

www.tuv.com
Page 18 of 61
Report No.: 50250100 001
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1F
Routine test
N/A
2.10.5.14
Additional insulation in wound components
No such construction.
N/A
Working voltage ............................................. :
N/A
- Basic insulation not under stress ..................... :
N/A
- Supplementary, reinforced insulation ............... :
N/A
2.10.6
Construction of printed boards
See below.
P
2.10.6.1
Uncoated printed boards
(see appended table 2.10.3
and 2.10.4)
P
2.10.6.2
Coated printed boards
No coated printed boards.
N/A
2.10.6.3
Insulation between conductors on the same inner
surface of a printed board
No multi-layer PCBs provided.
N/A
2.10.6.4
Insulation between conductors on different layers
of a printed board
No multi-layer PCBs provided.
N/A
Distance through insulation
N/A
Number of insulation layers (pcs) ....................... :
Single layer PCB
N/A
2.10.7
Component external terminations
(see appended table 2.10.3
and 2.10.4)
P
2.10.8
Tests on coated printed boards and coated
components
No such boards and
components
N/A
2.10.8.1
Sample preparation and preliminary inspection
N/A
2.10.8.2
Thermal conditioning
N/A
2.10.8.3
Electric strength test
N/A
2.10.8.4
Abrasion resistance test
N/A
2.10.9
Thermal cycling
N/A
2.10.10
Test for Pollution Degree 1 environment and
insulating compound
N/A
2.10.11
Tests for semiconductor devices and cemented
joints
No such devices except
approved optocoupler.
N/A
2.10.12
Enclosed and sealed parts
No hermetically sealed
component except optocoupler.
N/A
3
WIRING, CONNECTIONS AND SUPPLY
P
3.1
General
P
3.1.1
Current rating and overcurrent protection
Internal wiring gauge is suitable
for current intended to be
carried.
P
3.1.2
Protection against mechanical damage
The internal wires do not touch
sharp edges which cou
ld
damage the insulation
&
cause
hazard.
P