Instruction Manual

WAFER-CV-D25502/N26002 3.5" Motherboard
Page 45
Figure 4-3: LVDS Voltage Selection Jumper Location
4.3.4 PCI-104 VIO Voltage Selection
Jumper Label: JP1
Jumper Type:
3-pin header
Jumper Settings:
See
7Table 4-5
Jumper Location:
See
7Figure 4-4
Sets the PCI-104 VIO voltage to +5V or +3.3V.
Setting Description
Short 1-2 +5V
Short 2-3 +3.3V
Table 4-5: PCI-104 VIO Voltage Selection Jumper Settings
Figure 4-4: PCI-104 VIO Voltage Selection Jumper Location