Instruction Manual

WAFER-CV-D25502/N26002 3.5" Motherboard
Page 35
3.3.1 Ethernet Connectors
CN Label: LAN1, LAN2
CN Type:
RJ-45 connector
CN Location:
See 7Figure 3-22
CN Pinouts:
See 7Table 3-24
The WAFER-CV-D25502/N26002 is equipped with two built-in RJ-45 Ethernet controllers.
Each controller can connect to the LAN through one RJ-45 LAN connector.
Pin Description Pin Description
1 LAN_MDI0+ 5 LAN_MDI2+
2 LAN_MDI0- 6 LAN_MDI2-
3 LAN_MDI1+ 7 LAN_MDI3+
4 LAN_MDI1- 8 LAN_MDI3-
Table 3-24: LAN Pinouts
Figure 3-23: RJ-45 Ethernet Connector
LED Description LED Description
A on: linked
blinking: data is being sent/received
B off: 10 Mb/s
green: 100 Mb/s
orange: 1000 Mb/s
Table 3-25: RJ-45 Ethernet Connector LEDs