Manual

WAFER-945GSE 3.5" Motherboard
Page 48
Figure 4-7: LVDS Panel Resolution Jumper Pinout Locations
4.4.6 LVDS Voltage Selection
WARNING:
Permanent damage to the screen and WAFER-945GSE may occur if
the wrong voltage is selected with this jumper. Please refer to the user
guide that came with the monitor to select the correct voltage.
Jumper Label: J_VLVDS1
Jumper Type:
3-pin header
Jumper Settings:
See
Table 4-7
Jumper Location:
See
Figure 4-8
The LVDS Voltage Selection jumpers allow the LVDS screen voltages to be set.
Setting Description
Short 1-2 +3.3V LVDS (Default)
Short 2-3 +5V LVDS
Table 4-7: LVDS Voltage Selection Jumper Settings