Owner's manual

UPC-V315-NM70 Panel PC
Page 81

Force
BIOS
Sets display mode to force BIOS.

Keep
Current
DEFAULT
Sets display mode to current.
 UEFI Boot [Dis abled]
Use the UEFI Boot option to enable or disable to boot from the UEFI devices.

Enabled
Boot from UEFI devices is enabled.

Disabled DEFAULT
Boot from UEFI devices is disabled.
 Boot Option Priority
Use the Boot Option Priority function to set the system boot sequence from the available
devices. The drive sequence also depends on the boot sequence in the individual device
section.