Owner's manual

UPC-V315-NM70 Panel PC
Page 5
1.4.1.1 LED Indicators
The LED indicators on the front panel of the UPC-V315-NM70 are shown below.
Figure 1-3: LED Indicators
The descriptions of each LED indicator are listed below.
LED Indicator Description
Power 1 Pulsing Orange: Power 1 is the main power and is in standby mode
Solid Orange: Power 1 is the second power and is in standby mode
Solid Blue: Power 1 is providing power to the system
Power 2 Pulsing Orange: Power 2 is the main power and is in standby mode
Solid Orange: Power 2 is the second power and is in standby mode
Solid Blue: Power 2 is providing power to the system
AT/ATX Power Mode Shows the power mode status. Controlled by the AT/ATX power mode
switch.
CPU Temperature Alert Blue: the CPU temperature is normal.
Red: the CPU temperature is too high.
Wi-Fi The Wi-Fi module is enabled or disabled. Controlled by the BIOS (see
Section 4.4.1).
RFID Reader The optional RFID reader is enabled or disabled.
Controlled by the hot keys (see Section 1.4.5).
Bluetooth The Bluetooth module is enabled or disabled.
Controlled by the BIOS (see Section 4.4.1).
3G The 3G module is enabled or disabled.