User guide

UPC-V312-D525 Panel PC
Page 58
Use the Hyper Threading function to enable or disable the CPU hyper threading function.
Î
Disabled
Disables the use of hyper threading technology
Î
Enabled DEFAULT
Enables the use of hyper threading technology
4.3.3 IDE Configuration
Use the IDE Configuration menu (BIOS Menu 5) to change and/or set the configuration
of the IDE or SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
PATA Slave No Present
ATA/IDE Configuration [Compatible]
Legacy IDE Channels [PATA Only]
Select ATA/IDE
Configuration
---------------------
ÅÆ : Select Screen
↑ ↓: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save
ESC Exit
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 5: IDE Configuration
Î ATA/IDE Configurations [Compatible]
Use the ATA/IDE Configurations option to configure the ATA/IDE controller.
Î
Disabled
Disables the on-board ATA/IDE controller.
Î
Compatible DEFAULT
Configures the on-board ATA/IDE controller to be in
compatible mode. In this mode, a SATA channel will
replace one of the IDE channels. This mode supports up
to 4 storage devices.