User guide

UPC-V312-D525 Panel PC
Page 41
The USB ports are for attaching USB peripheral devices to the system. The pinouts of the
USB port is shown below.
Pin Description Pin Description
1 VCC 5 VCC
2 DATA- 6 DATA-
3 DATA+ 7 DATA+
4 GROUND 8 GROUND
Table 3-6: USB Port Pinouts
To install a USB device, follow the steps below.
Step 1: Locate the USB connectors. The locations of the USB connectors are shown
in
Figure 1-4.
Step 2: Align the connectors. Align the USB device connector with one of the
connectors. See
Figure 3-31.
Figure 3-31: USB Device Connection