User guide

UPC-V312-D525 Panel PC
Page 114
o Ubuntu 8.10 (Intrepid)
o Ubuntu 7.10 (Gutsy)
o Ubuntu 6.10 (Edgy)
o Debian 5.0 (Lenny)
o Debian 4.0 (Etch)
o SuSe 11.2
o SuSe 10.3
NOTE:
Installing unsupported OS versions may cause the recovery tool to fail.
B.2 Setup Procedure for Windows
Prior to using the recovery tool to backup or restore, a few setup procedures are required.
Step 1: Hardware and BIOS setup (see Section
B.2.1)
Step 2: Create partitions (see Section
B.2.2)
Step 3: Install operating system, drivers and system applications (see Section
B.2.3)
Step 4: Build the recovery partition (see Section
B.2.4) or build the auto recovery
partition (see Section
B.3)
Step 5: Create factory default image (see Section
B.2.5) Step 0:
The detailed descriptions are described in the following sections.
NOTE:
The setup procedures described below are for Microsoft Windows
operating system users. For Linux, most of the setup procedures are
the same except for several steps described in Section
B.3.