Owner's manual

UPC-12A/GM45 Panel PC
Page 65
Figure 5-1: SO-DIMM Socket Location
Step 5: Open the SO-DIMM socket handles. The SO-DIMM socket has two handles
that secure the SO-DIMM into the socket. Before the SO-DIMM can be removed
from the socket, the handles must be opened.
Step 6: Align the SO-DIMM with the socket. Align the notch on the memory with the
notch on the memory socket.
Step 7: Insert the SO-DIMM. Push the memory in at a 20º angle.
Step 8: Seat the SO-DIMM. Gently push downwards and the arms clip into place.
Step 0:
Figure 5-2: Installing a SO-DIMM
5.4.5 Gasket Replacement
A gasket used for a long time may gradually lose its ability to protect the monitor from
fluids and vapors; scratches or dirt may also accumulate. It is recommended that the
gasket be replaced yearly.