Owner's manual

UPC-12A/GM45 Panel PC
Page 43
Description Label Type
CF card setup JP8 2-pin header
CF voltage select JP7 3-pin header
COM4 function select JP4 14-pin header
COM4 function select JP5 12-pin header
Table 4-1: Jumpers
4.10.1 Access the Jumpers
To access the jumpers, please remove the rear cover. Please refer to Section 546H546H4.8 Step
1~2 for rear cover removal instruction.
4.10.2 Preconfigured Jumpers
WARNING:
Do not change the settings on the jumpers in described here. Doing so
may disable or damage the system.
The following jumpers are preconfigured for the UPC-12A/GM45. Users should NOT
change these jumpers.
Jumper Name Label Type
LVDS voltage selection JP3 6-pin header
Panel Type and Resolution JP1 8-pin header
Table 4-2: Preconfigured Jumpers