Owner's manual

UPC-12A/GM45 Panel PC
Page 90
Î
Enabled DEFAULT
Legacy USB support enabled
Î
Auto
Legacy USB support disabled if no USB devices are
connected
Î USB2.0 Controller Mode [HiSpeed]
Use the USB2.0 Controller Mode option to set the speed of the USB2.0 controller.
Î
FullSpeed
The controller is capable of operating at 12 Mb/s
Î
HiSpeed DEFAULT
The controller is capable of operating at 480 Mb/s
6.3.7 Power Configuration
The Power menu (BIOS Menu 11) allows the advanced power management options to be
configured.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
Power Supply Status [AT]
ÅÆ Select Screen
↑ ↓ Select Item
Enter Go to SubScreen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 12: Power Configuration
Î Power Supply Mode [AT]
Use the Power Supply Mode BIOS option to select the power supply that is connected to
the system.