Manual

UPC-12A/GM45 Panel PC
Page 61
Step 2: Turn off the power. See Section 585H585H585H585H584H584H584H586H5.3.
Step 3: Remove the internal aluminum chassis. See Section
585H585H585H587H5.4.3.
Step 4: Locate the SO-DIMM module. The SO-DIMM module is located below the CPU
heat sink. See
587H587H587H587H586H586H586H588HFigure 5-3.
Figure 5-3: SO-DIMM Socket Location
Step 5: Open the SO-DIMM socket handles. The SO-DIMM socket has two handles
that secure the SO-DIMM into the socket. Before the SO-DIMM can be removed
from the socket, the handles must be opened.
Step 6: Align the SO-DIMM with the socket. Align the notch on the memory with the
notch on the memory socket.
Step 7: Insert the SO-DIMM. Push the memory in at a 20º angle.
Step 8: Seat the SO-DIMM. Gently push downwards and the arms clip into place.
Step 0:
Figure 5-4: Installing a SO-DIMM