Manual

UPC-12A/GM45 Panel PC
Page 52
Figure 4-21: AT/ATX Switch
Step 2: Adjust the AT/ATX switch. The default mode is ATX mode (
570H570H570H570H570H570H570H572HFigure 4-21).
4.11.2 LAN Connection
There is one external RJ-45 LAN connector. The RJ-45 connector enables connection to
an external network. To connect a LAN cable with an RJ-45 connector, please follow the
instructions below.
Step 1: Locate the RJ-45 connectors on the I/O interface panel of the UPC-12A/GM45
series.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the I/O interface panel of the UPC-12A/GM45 series.
See
571H571H571H571H571H571H571H573HFigure 4-22.
Figure 4-22: LAN Connection