Instruction Manual

u IBX-210-CV-N2600 Embedded System
Page 73

Off
Does not enable the keyboard Number Lock automatically. To
use the 10-keys on the keyboard, press the Number Lock key
located on the upper left-hand corner of the 10-key pad. The
Number Lock LED on the keyboard lights up when the Number
Lock is engaged.

On DEFAULT
Allows the Number Lock on the keyboard to be enabled
automatically when the computer system boots up. This allows
the immediate use of the 10-key numeric keypad located on
the right side of the keyboard. To confirm this, the Number
Lock LED light on the keyboard is lit.
 Quiet Boot [Enabled]
Use the Quiet Boot BIOS option to select the screen display when the system boots.

Disabled
Normal POST messages displayed

Enabled DEFAULT
OEM Logo displayed instead of POST messages
 Launch PXE OpROM [Dis abled]
Use the Launch PXE OpROM BIOS option to enable or disable boot option for legacy
network devices.

Disabled DEFAULT
Cannot be booted from the legacy network devices.

Enabled
Can be booted from the legacy network devices.
 Option ROM Messages [Force BIOS]
Use the Option ROM Messages option to allow add-on ROM (read-only memory)
messages to be displayed.

Force BIOS DEFAULT
The system forces third party BIOS to display
during system boot.

Keep Current
The system displays normal information during
system boot.