Instruction Manual

u IBX-210-CV-N2600 Embedded System
Page 58
 Hyper-Threading: Indicates if hyper-threading is supported by the CPU.
 Hyper-Threading [Disabled]
Use the Hyper-Threading function to enable or disable the CPU hyper-threading function.

Disabled
Disables the use of hyper-threading technology

Enabled DEFAULT
Enables the use of hyper-threading technology
6.3.4 S ATA Configuration
Use the SATA Configuration menu (BIOS Menu 6) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2009 American Megatrends, Inc.
Advanced
SATA Mode [AHCI]
SATA Port1 Hitachi HTS543 (320.0
Select a configuration
for SATA Controller.
---------------------
 : Select Screen
↑ ↓: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 6: IDE Configuration
 SATA Mode [AHCI]
Use the SATA Mode option to configure SATA devices.

IDE
Configures SATA devices as normal IDE device.

AHCI DEFAULT
Configures SATA devices as AHCI device.