Instruction Manual

u IBX-210-CV-N2600 Embedded System
Page 49
Figure 5-10: Releasing the WLAN Card
Step 6: Grasp the WLAN card by the edges and carefully pull it out of the socket (Figure
5-11).
Figure 5-11: Removing the WLAN card
Step 7: Install a new WLAN card by inserting the card into the slot at an angle
Step 8: Push the WLAN card down until the spring retainer clips lock into place.
Step 9: Connect the antenna connectors on the WLAN module.
Step 10: Replace the back cover and secure it using eight (8) previously removed
retention screws.