Instruction Manual

u IBX-210-CV-N2600 Embedded System
Page 45
Figure 5-4: HDD Retention Screws
Step 6: Remove the old HDD from the HDD bracket (Figure 5-5)..
Figure 5-5: Remove the old HDD
Step 7: Slide the new HDD to the HDD bracket. Secure the HDD with the HDD bracket
by four HDD retention screws.
Step 8: Correctly align the four retention screw holes on the HDD bracket with the
retention screw holes on the chassis. Insert four previously removed retention
screws to secure the HDD bracket to the chassis.