Instruction Manual

u IBX-210-CV-N2600 Embedded System
Page 40
5 GND 6 GND
7 GND 8 GND
9 VGAVCC 10 HOTPLUG
11 NC 12 DDCDAT
13 HSYNC 14 VSYNC
15 DDCCLK
Table 4-20: VGA Connector Pinouts (VGA1)
4.4 Jumper Settings
The jumpers on the system motherboard are listed in Table 4-21.
Connector Type Label
AT/ATX mode select 2-pin header J_AUTOPWR1
Table 4-21: Jumper
4.4.1 AT/ATX Mode Select Jumper (J _AUTOP WR1)
Pin Description
Short AT Mode
Open ATX Mode (Default)
Table 4-22: AT/ATX Mode Select Jumper Settings (J_AUTOPWR1)