Instruction Manual

u IBX-210-CV-N2600 Embedded System
Page 17
Step 8: Carefully insert the screws through the holes and gently pull the system
downwards until the system rests securely in the slotted holes (Figure 3-6).
Ensure that all four of the mounting screws fit snuggly into their respective
slotted holes.
Figure 3-6: Chassis Support Screws
Step 9: Secure the uIBX-210-CV-N2600 by fastening the retention screw of the
wall-mounting bracket. (Figure 3-7). Step 0:
NOTE:
In the diagram below the bracket is already installed on the wall.