Owner's manual

uIBX-200-VX800 Embedded System
Page 49
Î
Suspend
When the power button is pressed the system goes into
suspend mode
 Resume on Ring [Disabled]
Use the Resume on Ring BIOS option to enable activity on the RI (ring in) modem line to
rouse the system from a suspend or standby state. That is, the system will be roused by
an incoming call on a modem.
Î
Disabled DEFAULT
Wake event not generated by an incoming call
Î
Enabled
Wake event generated by an incoming call
 Resume on LAN [Disabled]
When enabled this option allows the system to be brought out of a sleep state by a special
packet sent over the network.
Î
Disabled DEFAULT
Won't wake if special packet sent
Î
Enabled
Will leave sleep state when special packet is sensed
on the network
 Resume on RTC Alarm [Disabled]
Use the Resume on RTC Alarm option to specify the time the system should be roused
from a suspended state.
Î
Disabled DEFAULT
The real time clock (RTC) cannot generate a wake
event
Î
Enabled
If selected, the following appears with values that
can be selected:
RTC Alarm Date (Days)
System Time
After setting the alarm, the computer turns itself on
from a suspend state when the alarm goes off.