Owner's manual

uIBX-200-VX800 Embedded System
Page 24
STATUS DESCRIPTION STATUS DESCRIPTION
GREEN Activity YELLOW Linked
Table 4-6: RJ-45 Ethernet Connector LEDs
4.4.4 Serial Port Connector
CN Label: RS-232
CN Type:
DB-9 connectors
CN Location:
See
Figure 4-5
CN Pinouts:
See
Table 4-7 and Figure 4-12
RS-232 serial port devices can be attached to the DB-9 ports on the rear panel.
Step 1: Locate the DB-9 connector. The location of the DB-9 connector is shown in
Chapter 3.
Step 2: Insert the serial connector. Insert the DB-9 connector of a serial device into
the DB-9 connector on the external peripheral interface. See
Figure 4-11.
Figure 4-11: Serial Device Connector