Owner's manual

uIBX-200-VX800 Embedded System
Page 18
Figure 4-2: CompactFlash® Master/Slave Switch Location
4.2.3 Clear CMOS Jumper
Jumper Label: J_CMOS1
Jumper Type:
3-pin header
Jumper Settings:
See
Table 4-4
To reset the BIOS, move the jumper to the "Clear BIOS" position for 3 seconds or more,
then move back to the default position.
Setting Description
1-2 Keep current BIOS setup (Default)
2-3 Clear BIOS
Table 4-4: Clear BIOS Jumper Settings