Owner's manual

uIBX-200-VX800 Embedded System
Page 17
Setting Description
Open Use AT power
Closed Use ATX power (Default)
Table 4-2: AT/ATX Power Select Jumper Settings
Figure 4-1: AT/ATX Power Select Jumper Location
4.2.2 CompactFlash® Master/Slave Selection
Jumper Label: CF_MS_SEL1
Jumper Type:
3-pin header
Jumper Settings:
See
Table 4-3
Set the CompactFlash® card as an IDE master or an IDE slave.
Setting Description
1-2 Slave
2-3 Master (Default)
Table 4-3: CompactFlash® Master/Slave Selection