Manual

UIBX-200-R11/Z510P Embedded System
Page 18
4.3 CompactFlash® Card Installation
The UIBX-200-R11/Z510P supports a single CompactFlash® card. The CompactFlash®
card contains the operating system. To install, follow the steps below.
Step 1: Unlock and open the cover door.
Step 2: Slide the CompactFlash® card into the slot.
Step 3: Close and lock the door.
Step 0:
Figure 4-2: CompactFlash® Card Installation
4.4 SD Storage Card Installation (Optional)
An optional two SD card slots are available inside the UIBX-200-R11/Z510P. The SD
cards are used for storage only. The CompactFlash® card is used for the operating
system. To install SD cards in the UIBX-200-R11/Z510P, please follow the steps below.
Step 1: Turn the system upside down.
Step 2: Remove the screws.
Step 3: Slide back and lift to remove.