User's Manual

TRN-3200T-R100 Tablet PC
Page 28
4.3.5 SATA Configuration
Use the SATA Configuration menu (434H514H810HBIOS Menu 7) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
Advanced
SATA Controller(s) [Enabled]
SATA Mode Selection [AHCI]
mSATA1 (M_SATA1) Port 256GB SATA Fla (256.0GB)
Enable or disable SATA
Device.
---------------------
 : Select Screen
 : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.15.1229. Copyright (C) 2012 American Megatrends, Inc.
BIOS Menu 7: SATA Configuration
 SATA Controller(s) [Enabled]
Use the SATA Controller(s) option to configure the SATA controller(s).

Enabled
DEFAULT
Enables the on-board SATA controller(s).

Disabled
Disables the on-board SATA controller(s).
 SATA Mode Selection [AHCI]
Use the SATA Mode Selection option to determine how SATA devices operate.

IDE
Configures SATA devices as normal IDE device.

AHCI
DEFAULT
Configures SATA devices as AHCI device.