User Manual

TDM Series Monitor
Page 61
Step 7: Double click the PenMount 6000 icon as shown in Figure 6-9.
Step 8: The calibration initiation screen in
Figure 6-10 appears.
Step 9: Select the Standard Calibration button as shown in
Figure 6-10.
Figure 6-10: Calibration Initiation Screen
Step 10: The calibration screen in is shown. See
Figure 6-11.
Figure 6-11: Calibration Screen
Step 11: Follow the instructions. The user is asked touch the screen at five specified
points after which the screen is calibrated. Step 0: