User Manual

TDM Series Monitor
Page 40
Step 5: Slide the monitor with the attached rack mount kit into a rack or cabinet
(
Figure 4-11).
Figure 4-11: Install into a Cabinet/Rack
Step 6: Once the monitor with the attached cabinet/rack has been properly inserted into
the rack or cabinet, secure the front of the rack/cabinet bracket to the front of the
rack or cabinet (
Figure 4-11).
4.5.3 Wall Mounting
To mount the TDM series industrial monitor onto a wall, please follow the steps below.
Step 1: Select a location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four bracket screw holes on the wall.
Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.