User Manual

TDM Series Monitor
Page 18
Model Mounting Clamps
TDM-121GMS 10
TDM-150GMS 10
Table 2-3: Panel Mounting Clamps
2.6.2 Rack and Cabinet Mounting
Each model of the TDM series industrial monitor has a series of holes located on the rear
of the front panel for securing the monitor to the rack mounting kit.
Table 2-4 lists the number of holes each monitor has to secure the monitor to the rack
mounting kit.
Model Holes
TDM-121GMS 4
TDM-150GMS 6
Table 2-4: Rack Mounting Holes
2.6.3 Wall Mounting
Each model of the TDM series industrial monitor has four holes located on the rear panel
for mounting the monitor to a wall.
2.6.4 Monitor Arm or Stand Mounting
The TDM series industrial monitor has four Video Electronics Standards Association
(VESA) standard holes located on the rear panel for mounting the monitor to a monitor
arm or stand.
NOTE:
The monitor stand is purchased separately.