Owner manual

TANK-GM45 Embedded System
Page 46
Normally if this option is not enabled, any attached USB mouse or USB keyboard does not
become available until a USB compatible operating system is fully booted with all USB
drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard
can control the system even when there is no USB driver loaded onto the system.
Î
Disabled
Legacy USB support disabled
Î
Enabled DEFAULT
Legacy USB support enabled
Î
Auto
Legacy USB support disabled if no USB devices are
connected
 USB2.0 Controller Mode [HiSpeed]
Use the USB2.0 Controller Mode option to set the speed of the USB2.0 controller.
Î
FullSpeed
The controller is capable of operating at 12 Mb/s
Î
HiSpeed DEFAULT
The controller is capable of operating at 480 Mb/s
4.3.8 Power Configuration
The Power Configuration menu (BIOS Menu 12) configures the power options.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Power Exit
Power Supply Status [ATX]
ÅÆ Select Screen
↑ ↓ Select Item
Enter Go to SubScreen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 12: Power Configuration