Owner manual

TANK-GM45 Embedded System
Page 40
 Hardware Health Monitoring
The following system parameters and values are shown. The system parameters that are
monitored are:
 System Temperatures:
o CPU Temperature 1
o System Temperature 2
o PWM Temperature
 Voltages:
o CPU Core
o +1.05V
o +3.30V
o +5.00V
o +12.0V
o +1.5V
o +1.8V
o +5VSB
o VBAT
4.3.5 AHCI Configuration
NOTE:
Advanced Host Controller Interface (AHCI) is a new programming
interface for SATA host controllers. AHCI systems do not have
master/slave designation for SATA devices, each device is treated as a
master, and hardware-assisted native command queuing.
Use the AHCI Settings menu (BIOS Menu 8) to report on the auto-detection of devices
connected to the onboard SATA drive connectors.