Owner manual

TANK-GM45 Embedded System
Page 25
Pin Description Pin Description
1 RED 2 GREEN
3 BLUE 4 NC
5 GND 6 GND
7 GND 8 GND
9 VCC / NC 10 GND
11 NC 12 DDC DAT
13 HSYNC 14 VSYNC
15 DDCCLK
Table 3-12: VGA Connector Pinouts
3.4.9 AT/ATX Power Mode Selection
The TANK-GM45 supports AT and ATX power modes. The setting can be made through
the AT/ATX switch on the external peripheral interface panel as shown below.
Figure 3-19: AT/ATX Switch