Owner's manual

TANK-820-H61 Embedded System

Page 68

 USB Devices

The USB Devices field lists the USB devices that are enabled on the system

 Legacy USB Support [Enabled]

Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard

support. Normally if this option is not enabled, any attached USB mouse or USB keyboard

does not become available until a USB compatible operating system is fully booted with all

USB drivers loaded. When this option is enabled, any attached USB mouse or USB

keyboard can control the system even when there is no USB driver loaded onto the

system.



Enabled DEFAULT

Legacy USB support enabled



Disabled

Legacy USB support disabled



Auto

Legacy USB support disabled if no USB devices are

connected

5.3.8 F81216 Secondary Super IO Configuration

Use the F81216 Secondary Super IO Configuration menu (BIOS Menu 11) to set or

change the configurations for the serial ports.

Advanced

F81216 Secondary Super IO Configuration

Second Super IO Chip F81216 SecondIO

> Serial Port 7 Configuration

> Serial Port 8 Configuration

Set Parameters of Serial

Port 7 (COMA)

---------------------



: Select Screen

↑ ↓: Select Item

Enter Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

BIOS Menu 11: Secondary Super IO Configuration