Owner's manual

TANK-820-H61 Embedded System
Page 92

Keep
Current
Sets display mode to current.
 UEFI Boot [Dis abled]
Use the UEFI Boot option to enable or disable to boot from the UEFI devices.

Enabled
Boot from UEFI devices is enabled.

Disabled DEFAULT
Boot from UEFI devices is disabled.
5.6 Security
Use the Security menu (BIOS Menu 25) to set system and user passwords.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Main
Advanced
Chipset
Boot
Security
Save & Exit
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be:
Minimum length 3
Maximum length 20
Administrator Password
User Password
Set Administrator
Password
---------------------
 : Select Screen
↑ ↓: Select Item
Enter Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 25: Security
 Administrator Password
Use the Administrator Password to set or change an administrator password.
 User Password
Use the User Password to set or change a user password.