User Manual

TANK-820 Embedded System
Page 81
 2
 4
 8
 16
 Fan 2 Smart Fan control [Auto RP M Mode]
Use the Fan 2 Smart Fan control BIOS option to configure the Smart Fan (Fan2).

Manual RPM Mode
The fan spins at the speed set in the manual
setting

Auto RPM Mode DEFAULT
The fan adjusts its speed using these
settings:
First Boundary Temperature
Second Boundary Temperature
Third Boundary Temperature
Fourth Boundary Temperature
 First Boundary Temperature
Use the + or – key to change the First Boundary Temperature value. Enter a decimal
number between 1 and 100.
 Second Boundary Temperature
Use the + or – key to change the Second Boundary Temperature value. Enter a decimal
number between 1 and 100.
 Third Boundary Temperature
Use the + or – key to change the Third Boundary Temperature value. Enter a decimal
number between 1 and 100.
 Fourth Boundary Temperature
Use the + or – key to change the Fourth Boundary Temperature value. Enter a decimal
number between 1 and 100.