User Manual

TANK-820 Embedded System
Page 34
Step 2: Align the connectors. Align the USB device connector with one of the
connectors. See Figure 3-24.
Figure 3-24: USB Device Connection
Step 3: Insert the device connector. Once aligned, gently insert the USB device
connector into the on-board connector.
3.7.13 VGA Connector
The VGA connector connects to a monitor that accepts VGA video input.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Figure 1-2.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.