User Manual

TANK-800 Embedded System
Page 38
Pin Description Pin Description
1 VCC 5 VCC
2 DATA- 6 DATA-
3 DATA+ 7 DATA+
4 GROUND 8 GROUND
Table 3-8: USB Port Pinouts
3.7.12 VGA Connector
CN Label: VGA
CN Type:
15-pin Female
CN Location:
See
Figure 1-2
CN Pinouts:
See
Figure 3-30 and Table 3-9
The VGA connector connects to a monitor that accepts VGA video input.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in
Figure 1-2.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector. Once the connectors are properly aligned with,
insert the male connector from the VGA screen into the female connector on the
TANK-800. See
Figure 3-29.