User Manual

TANK-800 Embedded System
Page 30
Pin Description Pin Description
1 DIN0 6 DOUT2
2 DOUT0 7 DIN3
3 DIN1 8 DOUT3
4 DOUT1 9 VCC5
5 DIN2
Table 3-1: DIO Connector Pinouts
Figure 3-18: DIO Connector Pinout Location
3.7.6 LAN Connectors
CN Label: RJ45
CN Type:
RJ-45
CN Location:
See
Figure 1-2
CN Pinouts:
See
Table 3-2
The LAN connectors allow connection to an external network.
Step 1: Locate the RJ-45 connectors. The locations of the RJ-45 connectors are
shown in
Figure 1-2.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the TANK-800. See
Figure 3-19.