User Manual

TANK-800 Embedded System
Page 96
Step 7: The Symantec Ghost starts to create the factory default image (Figure A-27).
Figure A-27: Image Creation Complete
Step 8: After completing the system configuration, press any key in the following window
to restart the system.
Figure A-28: Press any key to continue
Step 9: Eject the One Key Recovery CD and restart the system.
Step 10: Press the <DELETE> key as soon as the system is turned on to enter the BIOS.
Step 11: Enable the Auto Recovery Function option (Advanced Æ iEi Feature Æ Auto
Recovery Function).