Manual

TANK-800 Embedded System
Page 22
Step 5: Reconnect the SATA signal and power cables to the TANK-800.
Step 6: Reinstall the cover.
3.4 System Fan Installation
To install the optional system fan, please follow the steps below:
Step 1: Loosen the thumbscrew, slide the cover inwards (
Figure 3-4), and then lift the
cover up gently.
Step 2: Unplug the SATA signal and power cables connected to the TANK-800, and then
place the cover on a flat surface (
Figure 3-5).
Step 3: Attach the system fan to the TANK-800 and secure it by four retention screws
(
Figure 3-8).
Figure 3-8: System Fan Installation