Manual

TANK-720 Embedded System
Page 62
4.3.6.1.1 Serial Port 7 Configuration
 Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.

Disabled
Disable the serial port

Enabled DEFAULT
Enable the serial port
 Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto DEFAULT
The serial port IO port address and interrupt address
are automatically detected.

IO=2C0h;
IRQ=10
Serial Port I/O port address is 2C0h
and the interrupt
address is IRQ10

IO=2E0h;
IRQ=10, 11
Serial Port I/O port address is 2E0h
and the interrupt
address is IRQ10, 11

IO=2C0h;
IRQ=3, 4
Serial Port I/O port address is 2C0h
and the interrupt
address is IRQ3, 4

IO=2C8h;
IRQ=3, 4
Serial Port I/O port address is 2C8h an
d the interrupt
address is IRQ3, 4

IO=2B0h;
IRQ=10, 11
Serial Port I/O port address is 2B0h
and the interrupt
address is IRQ10, 11

IO=2B8h;
IRQ=10, 11
Serial Port I/O port address is 2B8h
and the interrupt
address is IRQ10, 11
4.3.6.1.2 Serial Port 8 Configuration
 Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.