Instruction Manual

TANK-700 Embedded System
Page 79
 Un-Configure ME [Dis abled]
Use the Un-Configure ME option to perform ME un-configure without password
operation.

Disabled DEFAULT
Disable ME un-configure

Enabled
Enable ME un-configure
4.5 Boot
Use the Boot menu (BIOS Menu 20) to configure system boot options.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Main
Advanced
Chipset
Boot
Security
Save & Exit
Boot Configuration
Bootup NumLock State [On]
Quiet Boot [Enabled]
Boot Option Priorities
Select the keyboard
NumLock state
---------------------
 : Select Screen
↑ ↓: Select Item
Enter Select
+ - Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 20: Boot
 Bootup NumLock State [On]
Use the Bootup NumLock State BIOS option to specify if the number lock setting must
be modified during boot up.

On DEFAULT
Allows the Number Lock on the keyboard to be
enabled automatically when the computer system
boots up. This allows the immediate use
of the
10-key numeric keypad located on the right side of
the keyboard. To confirm this, the Number Lock LED
light on the keyboard is lit.