Instruction Manual

TANK-700 Embedded System
Page 78
 Power Saving Function [Dis abled]
Use the Power Saving Function BIOS option to enable or disable the power saving
function.

Disabled DEFAULT
The power saving function is disabled

Enabled
The power saving function is enabled
4.4.3 ME Configuration
Use the ME Configuration menu (BIOS Menu 19) to configure the Intel® Management
Engine (ME) configuration options.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Chipset
ME Configuration
ME FW Version 7.0.10.1203
ME Firmware Mode Normal Mode
ME Firmware Type Full Sku Firmware
ME Firmware SKU 5MB
Intel AMT [Enabled]
Un-Configure ME [Disabled]
Enable/Disable Intel(R)
Active Management
Technology BIOS
Extension.
Note : iAMT H/W is always
enabled. This option
just controls the BIOS
extension execution. If
enabled, this requires
aditonal firmware in the
SPI device.
---------------------
 : Select Screen
↑ ↓: Select Item
Enter Select
+ - Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 19: ME Configuration
 Inte l AMT [Enabled]
Use Intel AMT option to enable or disable the Intel® AMT function.

Disabled
Intel® AMT is disabled

Enabled DEFAULT
Intel® AMT is enabled